Sales  -  Service  -  Parts  -  Supplies

 

NOTE:  We only sell / service
products within Canada

Authorized Dealer /
Distributor for


SUNRAISE
Thermography
Business Card Slitter
Raised Lettering


IDEAL / MBM
Triumph, Plockmatic
Cutters, Drills,
Collator, Shredder,
Bookletmaker
Stapler, Stitcher


AKILIES
Coil Comb Binders
Booklet Maker
Laminator
Wire Binding

 

 

 

 
For more information or pricing, please call 905-902-0985

Sunraise Super 12 RC
Business Card Slitter

 
SUPER 4/RC: Print cards on a strip of stock 3.5" wide. Typeset cards so that up to a 3/8" gripper edge is left at the top and 1/8" trim at the bottom. Cards are placed in feed section and friction fed onto alignment table. After being registered, cards are then conveyed into knives, where they exit into the separators arms. Finally, cards are delivered neatly onto a slow moving fan out section.

 

SUPER 12/RC: Run 12 up cards on 8/5" x 11" stock. The first pass trims the outside perimeters and cuts the stock into three 8.5" x 3.5" strips. The operator then transfers 8.5" x 3.5" stock onto the 4-up side of the slitter, cutting up to 144,000 business cards per hour. Both feeders can be operated simultaneously.
For more information or pricing, please call 905-902-0985

MBM
BC 10 Business Card Slitter

This item DISCONTINUED and
Replaced by the BC-12

•  eliminates costly and time consuming business card production—cards can be printed on a laser printer or copier and cut to size in a single pass
•  cuts 10 standard size business cards per page (up to 100 cards per minute)
•  quick and easy set-up and adjustment
•  control panel includes LED 4 digit counter with addition and preset subtraction functions
•  self-sharpening blades
•  compact design and quiet operation make it ideal for corporate environments
•  self-correcting cut mark function ensures accurate cuts every time
•  safety access cover—machine will not operate with cover in open position
•  optional perforator, and scorer
•  UL and C UL approved

 

Dimensions (D x W x H): 16 1/2" x 23" x 12 3/4"
Shipping weight: 55 lbs.

Speed 10 sheets/min.*
Sheet capacity 50**
Paper size 8 1/2" x 11"
Business card size 2" x 3 1/2"
Power supply 120 V, 60 Hz

*single cut (=100 cards/min.)

List CND $4,999.00

 
For more information or pricing, please call 905-902-0985

MBM
BC 12 Business Card Slitter

 
  • TABLETOP CARD CUTTER

    can be used for a wide variety of jobs, including business cards, post cards, digital photos, checks, etc.
  •   eliminates costly and time consuming business card production—cards can be printed on a laser printer or copier and cut to size in a single pass
  •   cuts 12 standard size business cards per page (up to 60 cards per minute)
  •   quick and easy set-up and adjustment
  •  10 pre-set cutting modes
  •  control panel includes LED 4 digit counter with addition and preset subtraction functions
  •   self-sharpening blades
  •   compact design and quiet operation make it ideal for corporate environments
  •   self-correcting cut mark function ensures accurate cuts every time
  •   safety access cover—machine will not operate with cover in open position
  •  optional quick-change perforator and scorer cartridges
  •  UL and C UL approved
  • Dimensions (D x W x H): 17 x 29 1/4" x 11 1/4"
    Shipping weight: 61 lbs.
Speed 13 sheets/min.*
Sheet capacity 50**
Paper size 8 1/2" x 11" to 8 1/2" x 14"
Business card size 2" x 3 1/2"
Power supply 120 V, 60 Hz

List CND $5,999.00

 
For more information or pricing, please call 905-902-0985

 

 

 
©2008 MCTech Inc. Sales  -  Service  -  Parts  -  Supplies